F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > N55 Turbo Engine / Drivetrain / Exhaust Modifications > F30 JB4 Stage2 Dyno Testing
Post Reply
 
Thread Tools Search this Thread
      02-08-2013, 12:30 PM   #45
jamesems
First Lieutenant
 
Drives: 2013 335i msport f30
Join Date: Nov 2012
Location: San Diego

Posts: 388
iTrader: (0)

That link I provided suggests the various transmissions span the 3 series line. It may be possible the heavier duty tranny's could bolt right up. Replace the 335i with say the diesels tranny. That would address the tranny's rating. More weight and very expensive option. Ill be waiting this one out too despite the fantastic numbers.
jamesems is offline  
0
Reply With Quote
      02-08-2013, 12:39 PM   #46
Rustyboy155
Enlisted Member
 
Drives: 2010 GTI
Join Date: Jan 2013
Location: Long Beach, CA

Posts: 45
iTrader: (0)

Anyone have insight into the stock clutch on the 6sp? I'd be willing to bet that the factory clutch probably isn't rated anywhere near 500+ lb ft of torque.
Rustyboy155 is offline  
0
Reply With Quote
      02-08-2013, 01:00 PM   #47
bosz
Captain
 
bosz's Avatar
 
Drives: F30 335i Ordered
Join Date: Dec 2011
Location: toronto

Posts: 697
iTrader: (0)

all the above is why I will stick to JB stage 1 for now.


Does anyone know what the e90 auto tranny is rated at? I mean all those e90s with JB4s, Dp, exhaust etc have 10s of thousands of miles with such high output numbers yet apparently no major problems like tranny failure...
__________________
**JB Stage 1** 2012 F30 335i/BSM/Coral Red Interior/Diamond Black Trim/Premium Pack/BMW Apps/Ext Blue Tooth/Sirius XM/Sport Auto W/Paddle Shifters/Sport Suspension/Meisterschaft Super GT Exhaust
bosz is offline  
0
Reply With Quote
      02-08-2013, 01:46 PM   #48
verbs
Lieutenant
 
Drives: 2013 335i M-Sport
Join Date: Aug 2010
Location: Phoenix, AZ

Posts: 524
iTrader: (0)

Quote:
Originally Posted by buildbright View Post
Where does it say crank?
Automakers and OEM part suppliers rate everything in crank horsepower, not rear wheel horsepower. Aftermarket performance community is all about rear-wheel.
verbs is offline  
0
Reply With Quote
      02-08-2013, 01:54 PM   #49
verbs
Lieutenant
 
Drives: 2013 335i M-Sport
Join Date: Aug 2010
Location: Phoenix, AZ

Posts: 524
iTrader: (0)

Quote:
Originally Posted by jamesems View Post
That link I provided suggests the various transmissions span the 3 series line. It may be possible the heavier duty tranny's could bolt right up. Replace the 335i with say the diesels tranny. That would address the tranny's rating. More weight and very expensive option. Ill be waiting this one out too despite the fantastic numbers.
It appears them may not be direct bolt ons. If you look at the two tranny's spec sheets you'll see different dimensions. That could cause a whole host of bolt on issues including the need for a shorter driveshaft, etc.

No way I'm going to want to have to spend $5,000+ for a full tranny upgrade and possible drivetrain alteration. If that's what it takes to handle a stage 2 tune with a D/P vs. just a stage 1 with no D/P, I'm stage 1ing all day long.



http://www.zf.com/media/media/produc..._DataSheet.pdf

http://www.zf.com/media/media/produc..._DataSheet.pdf
verbs is offline  
0
Reply With Quote
      02-08-2013, 02:08 PM   #50
jamesems
First Lieutenant
 
Drives: 2013 335i msport f30
Join Date: Nov 2012
Location: San Diego

Posts: 388
iTrader: (0)

Quote:
Originally Posted by verbs View Post
It appears them may not be direct bolt ons. If you look at the two tranny's spec sheets you'll see different dimensions. That could cause a whole host of bolt on issues including the need for a shorter driveshaft, etc.

No way I'm going to want to have to spend $5,000+ for a full tranny upgrade and possible drivetrain alteration. If that's what it takes to handle a stage 2 tune with a D/P vs. just a stage 1 with no D/P, I'm stage 1ing all day long.



http://www.zf.com/media/media/produc..._DataSheet.pdf

http://www.zf.com/media/media/produc..._DataSheet.pdf
No argument here. Good info btw
jamesems is offline  
0
Reply With Quote
      02-08-2013, 02:31 PM   #51
buildbright
Captain
 
buildbright's Avatar
 
Drives: 335i BMW F30 Sedan
Join Date: Sep 2012
Location: Tampa, FL

Posts: 907
iTrader: (0)

Quote:
Originally Posted by verbs View Post
Automakers and OEM part suppliers rate everything in crank horsepower, not rear wheel horsepower. Aftermarket performance community is all about rear-wheel.
Most is the case with the US companies, European companies tends to differ. My whole point was no one knows for sure how much power these trannies can take. I have seen transmissions take 3 times their rated limits and I have seen transmissions bust under factory load. But ZF usually underrates their transmissions.
buildbright is offline  
0
Reply With Quote
      02-08-2013, 06:13 PM   #52
jsedlak
First Lieutenant
 
jsedlak's Avatar
 
Drives: F30 335i 6spd
Join Date: Sep 2012
Location: Morristown, NJ

Posts: 394
iTrader: (0)

Will the F80 M3 transmission be a possibility? What about the F10 M5 transmission?
__________________
johnsedlak.com - web developer, designer
jsedlak is offline  
0
Reply With Quote
      02-08-2013, 06:22 PM   #53
Jamesons Viggen
Brigadier General
 
Drives: '98 M Roadster stg 2 S/C
Join Date: Jul 2012
Location: New Jersey

Posts: 3,427
iTrader: (3)

That's one thing the 6mt has going for it. Power and torque increase, throw in a clutch for about a grand and call it a day.

A stock auto handling 10% over it's tq rating is one thing, 30-40% is really pushing it.
__________________
'98 M Roadster stg 2+ S/C @ 13psi(cracking 500hp this summer) +'13 EBII M Sport 328i 6mtFOR SALE
Jamesons Viggen is online now   United_States
0
Reply With Quote
      02-08-2013, 06:24 PM   #54
Jamesons Viggen
Brigadier General
 
Drives: '98 M Roadster stg 2 S/C
Join Date: Jul 2012
Location: New Jersey

Posts: 3,427
iTrader: (3)

Quote:
Originally Posted by jsedlak View Post
Will the F80 M3 transmission be a possibility? What about the F10 M5 transmission?
New m3 might be good as you might not need a custom driveshaft. F10 will definitely mean more custom fab work.
__________________
'98 M Roadster stg 2+ S/C @ 13psi(cracking 500hp this summer) +'13 EBII M Sport 328i 6mtFOR SALE
Jamesons Viggen is online now   United_States
0
Reply With Quote
      02-09-2013, 12:12 AM   #55
buildbright
Captain
 
buildbright's Avatar
 
Drives: 335i BMW F30 Sedan
Join Date: Sep 2012
Location: Tampa, FL

Posts: 907
iTrader: (0)

Quote:
Originally Posted by Jamesons Viggen View Post
That's one thing the 6mt has going for it. Power and torque increase, throw in a clutch for about a grand and call it a day.

A stock auto handling 10% over it's tq rating is one thing, 30-40% is really pushing it.
The N54 6sp Steptronic has a lower rating and people have run over 450lbs without problems so yes it is very likely.
buildbright is offline  
0
Reply With Quote
      02-09-2013, 02:02 PM   #56
pelo911
Enlisted Member
 
Drives: f30 335i
Join Date: Feb 2013
Location: houston

Posts: 45
iTrader: (0)

i don't understand

burger ECU stage 2 already avilable for F30?
pelo911 is offline  
0
Reply With Quote
      02-09-2013, 02:08 PM   #57
jamesems
First Lieutenant
 
Drives: 2013 335i msport f30
Join Date: Nov 2012
Location: San Diego

Posts: 388
iTrader: (0)

Quote:
Originally Posted by buildbright View Post
The N54 6sp Steptronic has a lower rating and people have run over 450lbs without problems so yes it is very likely.
What's the rating for that series?
jamesems is offline  
0
Reply With Quote
      02-09-2013, 03:17 PM   #58
buildbright
Captain
 
buildbright's Avatar
 
Drives: 335i BMW F30 Sedan
Join Date: Sep 2012
Location: Tampa, FL

Posts: 907
iTrader: (0)

Quote:
Originally Posted by jamesems View Post
What's the rating for that series?
400nm = 295 lb ft
buildbright is offline  
0
Reply With Quote
      02-09-2013, 09:26 PM   #59
RollingLower42
Lieutenant
 
RollingLower42's Avatar
 
Drives: 2012 BMW 335I
Join Date: May 2012
Location: Los Angeles

Posts: 517
iTrader: (0)

Garage List
I don't understand what some people are saying with the engine tranny's on here..

Are you guys saying, if we want to run Stage 2, we will have to upgrade our transmission?
RollingLower42 is offline  
0
Reply With Quote
      02-10-2013, 02:51 AM   #60
nsquared
[Versatile]
 
nsquared's Avatar
 
Drives: (S)LOW.
Join Date: Jun 2011
Location: California & Utah

Posts: 1,509
iTrader: (0)

Is the dyno graph showing power increases at the wheels or?!
__________________
'13 AW F30 335i ///M-Sport 6MT. OEM(+).

[Liquid Innovations] [Envisions] [Rob's Speed Shop]
nsquared is offline  
0
Reply With Quote
      02-10-2013, 09:58 AM   #61
utenigma
Lieutenant
 
Drives: 2013 F30 335i 8SA M-Adaptive
Join Date: Oct 2012
Location: Dallas, Tx (Frisco)

Posts: 456
iTrader: (0)

Garage List
Back on topic of the tune...

Quote:
Originally Posted by Mike@N54Tuning.com View Post
The F30 Stage2 is similar to the N54 and E90 N55 JB4 with the exception of functional dash control. So, no in dash gauges. But you can cycle through maps and disable the tune all together using the steering wheel controls.
So Mike-is there any feedback mechanism to tell you what tune you're running?

Are in-dash controls in the works, or is the F30 gauge cluster just to complicated to mess with

Does the stage 2 for the F30 clear codes?

Does the stage 2 handle the rear o2 sensor delete for running a castles DP? (does the stage 1 do this as well?)

-Also, I find it interesting that all 3 maps line up after 6k rpm. I guess at that speed we just run into the volumetric limit of the stock turbo

Last edited by utenigma; 02-10-2013 at 10:54 AM.
utenigma is offline   United_States
0
Reply With Quote
      02-12-2013, 01:41 PM   #62
Mike@N54Tuning.com
BimmerPost Supporting Vendor

 
Drives: 07335i
Join Date: Dec 2008
Location: Earth

Posts: 13,919
iTrader: (83)

Quote:
Originally Posted by utenigma View Post
Back on topic of the tune...



So Mike-is there any feedback mechanism to tell you what tune you're running?

Are in-dash controls in the works, or is the F30 gauge cluster just to complicated to mess with

Does the stage 2 for the F30 clear codes?

Does the stage 2 handle the rear o2 sensor delete for running a castles DP? (does the stage 1 do this as well?)

-Also, I find it interesting that all 3 maps line up after 6k rpm. I guess at that speed we just run into the volumetric limit of the stock turbo
For any addl info you'll need to check BMS' forum where they release updates, etc. But I know it has a DPFIX built in for the downpipe, and automatically deletes all hidden tuner codes.

Mike
__________________
BEST PRICES GUARANTEED - New N54 Performance Line Downpipes!!
JB4 **G5** On Sale - FREE Shipping Click Me - NEW JB4(N55) & DCI's $95.00
NEW F30 N20/N55 ER Downpipes and Chargepipes - BMS OCC (On Sale)
Mike@N54Tuning.com is offline   Canada
0
Reply With Quote
      02-12-2013, 02:00 PM   #63
Mike@N54Tuning.com
BimmerPost Supporting Vendor

 
Drives: 07335i
Join Date: Dec 2008
Location: Earth

Posts: 13,919
iTrader: (83)

Here is a video of how to enable/disable the JB4 using the beta software.

__________________
BEST PRICES GUARANTEED - New N54 Performance Line Downpipes!!
JB4 **G5** On Sale - FREE Shipping Click Me - NEW JB4(N55) & DCI's $95.00
NEW F30 N20/N55 ER Downpipes and Chargepipes - BMS OCC (On Sale)
Mike@N54Tuning.com is offline   Canada
0
Reply With Quote
      02-12-2013, 02:49 PM   #64
nsquared
[Versatile]
 
nsquared's Avatar
 
Drives: (S)LOW.
Join Date: Jun 2011
Location: California & Utah

Posts: 1,509
iTrader: (0)

Quote:
Originally Posted by Mike@N54Tuning.com View Post
Here is a video of how to enable/disable the JB4 using the beta software.
Mike, were the dyno graphs showing power at the wheels?!
__________________
'13 AW F30 335i ///M-Sport 6MT. OEM(+).

[Liquid Innovations] [Envisions] [Rob's Speed Shop]
nsquared is offline  
0
Reply With Quote
      02-12-2013, 03:11 PM   #65
m3 guy
Major
 
m3 guy's Avatar
 
Drives: 2012 X5M
Join Date: Apr 2012
Location: Hawaii

Posts: 1,148
iTrader: (3)

Do you know if they are planning to integrate with the p3cars gauge as well?
__________________

2013 F30 335 Estoril Blue-Black SOLD
2012 E70 X5M Monte Carlo Blue-Silverstone Journal
m3 guy is offline   United_States
0
Reply With Quote
      02-12-2013, 03:39 PM   #66
ridin135
Colonel
 
Drives: 991 C2S
Join Date: Dec 2008
Location: Greenville

Posts: 2,160
iTrader: (7)

Quote:
Originally Posted by nsquared View Post
Mike, were the dyno graphs showing power at the wheels?!
It's to the wheels
ridin135 is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:19 AM.




f30post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST