[DrivenByE30]

great post advantage20 !

[maysiu]

it looks great!!

[advantage20]

I think the profile picture that some of you guys have used to measure the vehicle's length with the 19" rims serving as measure unit has delusional proportions, hence you came up with an unrealistically short total length...

Here are a few other profile pics you can use:





--> These seem to be the F30's 17" type 394






--> Unknown to me but apparently 17" as well




--> M4 apparently on 19"


Maybe the measures will prove me wrong but I can't quite believe the F32 is shorter than the F30 or even the E92 (F30 is 4m62, E90 is 4m52 and E92 is 4m59)... unless BMW deliberately made the F32 less spacious than the E92 so that people looking for rear room upgrade to the 4 GranCoupé

[SamS]

Originally Posted by advantage20

I'm trying to figure out the tail lights...

Usually BMW tail lights have one part on the rear fender side and one on the trunk lid, the part on the fender being thicker and ending higher up, but the 2 parts usually being clearly separated at sharp angles on each side of the trunk lid edge which cuts the tail lights into 2.

Some time ago, SCOTT26 said the F32 tail lights would most closely resemble those of the 5GT. Probably referring to the "kink" in the LED light bars, or the entire assembly?

[advantage20]

Originally Posted by SamS

Some time ago, SCOTT26 said the F32 tail lights would most closely resemble those of the 5GT. Probably referring to the "kink" in the LED light bars, or the entire assembly?

Yes I remember he said they would look like 5GT but flatter and his own sketch seemed to confirm that, but what can be seen underneath the tarp doesn't quite reflect that

[SamS]

Originally Posted by advantage20

Yes I remember he said they would would look like 5GT but flatter and his own sketch seemed to confirm that, but what can be seen underneath the tarp doesn't quite

Yeah, I see what you mean. I'm really not sure at this point...

One thing that bugs me about all the renders so far, is that NONE get the kidney/headlight transition correct! It's not going to look just like an F30 nose. The lights will connect to the top of the kidneys, then pull away as it goes lower. You can see this on the 5GT (kind of), or the 328i hommage.

SCOTT26's sketches of the nose (side) reflect this clearly.

[advantage20]

Done this very quickly... Still puzzling



If these were 18" though the result would approximately equal the E92 length.

[advantage20]

Originally Posted by SamS

One thing that bugs me about all the renders so far, is that NONE get the kidney/headlight transition correct! It's not going to look just like an F30 nose. The lights will connect to the top of the kidneys, then pull away as it goes lower. You can see this on the 5GT (kind of), or the 328i hommage.

SCOTT26's sketches of the nose (side) reflect this clearly.

Exactly, I noticed this as well. I've done this very grossly based on another member's render just to interpret Scott26's sketch :

[bimmerjph]

Originally Posted by advantage20

I'm trying to figure out the tail lights...

Usually BMW tail lights have one part on the rear fender side and one on the trunk lid, the part on the fender being thicker and ending higher up, but the 2 parts usually being clearly separated at sharp angles on each side of the trunk lid edge which cuts the tail lights into 2.

They also have tape running around the edges of the lights, so that most likely hides the true outline.

Originally Posted by advantage20

Done this very quickly... Still puzzling



If these were 18" though the result would approximately equal the E92 length.

The reason that isn't working is that the car is not perfectly straight across in relation to the camera. If it is pointing towards or away from the camera it will hide the length when measuring it.

[mechatune]

wait, they won't be making a 428i?

[SamS]

Originally Posted by advantage20

Exactly, I noticed this as well. I've done this very grossly based on another member's render just to interpret Scott26's sketch

Yes! There ya go.

[Holset]

This looks promising!

Maybe this has been brought up in the thread before but to me it looks like the back wheel is too much forward in the wheel housing.
But i guess thats going to be fixed on the production cars as this pictured car is only a test car.

[soolman32]

Very excited to see this car. it'll be round around the time I need a new DD.

[advantage20]

Originally Posted by mechatune

wait, they won't be making a 428i?

Of course they will, why wouldn't they?

I guess the 4er will (globally) get:

420i (184ps)
425i (218ps)
428i (245ps)
435i (320ps?)

420d (184ps)
425d (218ps)
430d (258ps)
435d (313ps)

+ M Performance variant(s) 340ps M440i?? 330ps M440d??

[Evan135]

Maybe this car is shorter. It is a 2 door for one and it would look better shorter. They also want to seperate it from the 3 sedan. Being physically different also helps to establish another reason for the increased cost as it is usually more expensive from a production numbers view to have two different wheel bases.

Also it kind of makes sense. 4 series 2 door shorter on its own wheel base, 3 sedan on its longer wheelbase, and 4 Grand Coupe on the stretched 3 series LI wheel base. It starts to visually really separate the cars.

I like it as with the light weight suspension the M version is supposed to be getting and less body to haul around the M4 could have a nice weight loss. Also the 4 series would be a more nibble handler with the shorter wheel base.

[advantage20]

(From AutoBild I think)

[Calmwinds]

Originally Posted by nenadbogar

haha yeah that guys is huge. i was thinking did they make this car smaller

The car actually looks smaller than the F30. At least judging from the man standing outside the car. Definitely looks more sexy and more sporty than E92 though on the side pics (compared to the red E92)

[kv12]

Originally Posted by mechatune

wait, they won't be making a 428i?

All I know is that Coupe versions of BMW 428i and BMW 435i + thier xDrive counterparts has been confirmed for the Canadian market.

[Vector Pilot]

Originally Posted by advantage20

(From AutoBild I think)

If this is what we can expect, I'm all in.

[GregD]

Originally Posted by Jason

The F32 4 Series Coupe will begin production in July 2013 and the F33 Convertible's production will follow in November 2013. A concept 4 Series is reportedly headed for the 2013 Detroit Auto Show in January.

If production would begin in July, when could the orders start, after the concept has been revealed?

Also, would the M-sport be available from the start or can we expect a 6 month delay as with the F30?

[Vector Pilot]

I'm going to reserve my thought the F32 will be priced well above F30. Time will tell... I don't think BMW will price it beyond it's intended market, look at the E89 Z4, priced too high for the casual sports car enthusiast.

[ScarecrowBoat]

Originally Posted by advantage20

Done this very quickly... Still puzzling



If these were 18" though the result would approximately equal the E92 length.

You CANT DO THAT!!! Just because it is a 17" rim does not mean it is exactly 17" in diameter. Rims have a lip that may be as much as 0.75" on BOTH sides.

The F32 is a bit on the short side AND that's a bad angle.