[slmdgee]

Well i am looking to get 19x10 plus 25 all around!!! Will be running 225/40/19 all around as well. Will it fit, i am going to be slammed? Let me know what i need to do.

[jsedlak]

Read this thread:

http://www.f30post.com/forums/showthread.php?t=713771

We discuss running 19x10 in the rear.

[mikew2069]

225 on a 10" wheel? Shiza!!!

[Andy0323]

Holy stretched batman. 225's on a 10" barrel will be extremely stretched. Are you herrafrushing your ride? Since I don't own an F30, you'll have to do some measurements and report back.

According to my calculations, 19x10 +25 measurements in comparison to a stock 18x8 +34:
Hub to outer barrel lip will extend by +1.35~ inches / +34.4~ mm
Hub to inner barrel lip will extend by +0.65~ inches / +16.4~ mm
Keep in mind, a 10" wheel may not necessarilly be 10" in total width... ie: A 10" Advan wheel is actually 10.5" total width, thus offset and width fine tuning in calculations may be necessary.

First major questions:
1. Do you have enough room within your fenders to house the extra width?
2. Do you have enough camber leverage to slam it and tuck your tires/wheels?
3. Are you willing to roll your fenders?
4. Do you really want to drive like this? (lol... sorry, I had to ask this question).

[slmdgee]

Lolz i am on the floor rite now

[jrob]

Yuck, that's going to look so stretched.