BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc. - Page 5 - BMW 3-Series Forum (F30 / F32)

Raspartan · 06-03-2012, 05:47 PM

Quote:

Originally Posted by pcbrew

I just figured I would use two 1K ohm in parallel - 500 ohm should be close enough (better than easily available 470 or 560) and I can get them at the neighborhood Radio Shack.

I thought about putting together a combination in parallel to get even closer, but the space in the connector housing looks like it would be a bit constrained. Anyway, I have the exact resistor so I should be OK.

Raspartan · 06-03-2012, 05:50 PM

Quote:

Originally Posted by E90Fleet

They are pretty easy to get from European electronics suppliers

Took a bit of looking to find them here mind you.

chip2058 · 06-03-2012, 07:08 PM

Quote:

Originally Posted by E90Fleet

Apps requires a download from BMW and a VIN and Download specific unlock code.
They wont let you get it for free

Not surprised, but I don't get why they won't let you retrofit it on the F30 like you could on the E90. The hardware is definitely there and I think the case in point is even stronger as its now packaged for 2013.

svache · 06-04-2012, 12:49 AM

Quote:

Originally Posted by Boomer19031

I have ordered my car with the extra Speed Limit Info.
In anotther forum it was discussed that the Speed Limit Info extra has basically the same hardware as Lane Departure warning and High Beam Assistence in the f10. If this is the same in the F30 shouldn't it be possible to code the Features of the LDW and HBA to my F30. Any thought on this?

I have the feeling it could work but I'm unsure. Thing is that the HBA and LDW both have their own on-off switch, so it might still be something included in the hardware as well. It's worth to take a look at it, of course

Quote:

Originally Posted by yerffejleahcim

Wow a bunch of development on coding Svache.

Request - Front Corner Light Delete - It turns off the corner lights and only would blink when turning. I saw it on E90 forum...

I'll keep an eye out when I'm in the code again (unfortunately not doing so much lately due to that new house we bought).

Edit: Wait.. do you mean the amber turn signals (well, white in your case lol), or the fog lights during cornering?

yerffejleahcim · 06-04-2012, 02:16 AM

Quote:

Originally Posted by svache

Edit: Wait.. do you mean the amber turn signals (well, white in your case lol), or the fog lights during cornering?

No rush bro. I know you are busy. Hehe. Yup just the corner/turn signal lights. When you turn on your lights, they stay lit all the time. If we can turn them off and just light up when signaling. That would be awesome!

E90Fleet · 06-04-2012, 03:25 AM

Quote:

Originally Posted by chip2058

Not surprised, but I don't get why they won't let you retrofit it on the F30 like you could on the E90. The hardware is definitely there and I think the case in point is even stronger as its now packaged for 2013.

Retrofittings usually take a while to appear
It will probably be available in a few months

E90Fleet · 06-04-2012, 03:36 AM

Quote:

Originally Posted by Raspartan

Took a bit of looking to find them here mind you.

Would think DigiKey would ship to you if you cant find next time
http://www.digikey.com/product-detai...1ZCT-ND/595057

svache · 06-04-2012, 04:09 AM

Quote:

Originally Posted by yerffejleahcim

No rush bro. I know you are busy. Hehe. Yup just the corner/turn signal lights. When you turn on your lights, they stay lit all the time. If we can turn them off and just light up when signaling. That would be awesome!

It's ok, I was browsing a bit through the codes and such and I think I might be on to something, not entirely sure but will see if I can test it out tomorrow (too dark now lol). I can see why you want it, and seeing how I'm getting the same lights soon I figured I probably want it myself as well haha

Raspartan · 06-04-2012, 07:31 AM

Quote:

Originally Posted by E90Fleet

Would think DigiKey would ship to you if you cant find next time
http://www.digikey.com/product-detai...1ZCT-ND/595057

Thanks, since I couldn't find them in town I actually ordered from them. Turns out they have a warehouse here in Canada, Manitoba I think. Shipping would have dwarfed the unit price but luckily there were a few other items I was interested in, so it worked out for me.

svache · 06-05-2012, 01:51 AM

For those with the cold weather package, it's indeed possible to select the amount of intervals in between, you can turn it completely off (which is what I did with my own car just now), you can select how many sprays you want and some more things.. the PDF contains that what I played around with for a bit

Quote:

Originally Posted by yerffejleahcim

No rush bro. I know you are busy. Hehe. Yup just the corner/turn signal lights. When you turn on your lights, they stay lit all the time. If we can turn them off and just light up when signaling. That would be awesome!

And this worked out too.. I do not have the side markers anymore, will code this on your car when we go put the new bulbs in my car

(they already send me a tracking number so it should be somewhere this week)

Here's how it looks without:

yerffejleahcim · 06-05-2012, 02:23 AM

Quote:

Originally Posted by svache

For those with the cold weather package, it's indeed possible to select the amount of intervals in between, you can turn it completely off (which is what I did with my own car just now), you can select how many sprays you want and some more things.. the PDF contains that what I played around with for a bit

And this worked out too.. I do not have the side markers anymore, will code this on your car when we go put the new bulbs in my car

(they already send me a tracking number so it should be somewhere this week)

Here's how it looks without:

Amazing! You made my day bro!! You are a master in coding!

MikaelE · 06-06-2012, 03:15 PM

I'm not sure I understand what's written in this thread, but I really hope it can help me getting on with my retrofit plans.

I trying to figure out what I need to retrofit cruise control and USB/BT.

If I get all the right parts, will the coding that is described in this thread be able to get the stuff working?

red-sauerkraut · 06-07-2012, 04:55 PM

Great, maybe shut off BMW assist because they are mostly useless IMO.

Number · 06-07-2012, 05:58 PM

Svache! Congrats on the sticky and front page.

johnca · 06-07-2012, 06:03 PM

Thanks for sharing this help lots of people who didn't have the options with the car, shame on BMW some options they should give to most BMW cars as standard to become a leader of the car industry, but when they think about $$$$ Money yeah get options let people pay for it.

I don't know some options most JAP cars give as standard!!!

msellars · 06-07-2012, 07:08 PM

Is it possible to change the engine parameters ourselves? I have no clue how companies like Dinan change the ECU. Does anybody know how many parameters are changed and how they test it out?

Mahzari · 06-07-2012, 07:11 PM

This is amazing. The first I'm going to do when I get my F30 is get rid of auto start stop, the seatbelt warning, and the message on the iDrive.

Thanks again

KSF · 06-07-2012, 09:16 PM

wait I'm kind of confused, will the diy cable work on previous models? such as e92?

Raspartan · 06-07-2012, 09:56 PM

Didn't have much time after work today, but got a good start on the cable. Just need to solder the resistor and assemble the casing. I'll probably work on this on Saturday. Exciting!

d_dot · 06-07-2012, 10:14 PM

is there anything like this for the new 535?

09BlkSapphire · 06-07-2012, 10:16 PM

Quote:

Originally Posted by d_dot

is there anything like this for the new 535?

This also works for the F10

antzcrashing · 06-07-2012, 10:17 PM

Quote:

Originally Posted by svache

Well I received my cable today and did some coding already. If you're interested in coding yourself, read on

you are the man. Now what can we do if we have an e90

06-06-2012, 03:15 PM	#100
MikaelE New Member Drives: BMW 320D EDE (F30) Join Date: Jun 2012 Location: Denmark Posts: 18 iTrader: (0)	I'm not sure I understand what's written in this thread, but I really hope it can help me getting on with my retrofit plans. I trying to figure out what I need to retrofit cruise control and USB/BT. If I get all the right parts, will the coding that is described in this thread be able to get the stuff working? __________________ BMW 320D EDE (F30) BMW 518i Touring (E34)

06-07-2012, 04:55 PM	#101
red-sauerkraut . Drives: m-car / x-car Join Date: Oct 2007 Location: northern hemisphere Posts: 2,767 iTrader: (0)	Great, maybe shut off BMW assist because they are mostly useless IMO. __________________ Joy

06-07-2012, 06:03 PM	#103
johnca Second Lieutenant Drives: E46 Slow CSL Join Date: May 2007 Location: Sydney Posts: 290 iTrader: (0)	Thanks for sharing this help lots of people who didn't have the options with the car, shame on BMW some options they should give to most BMW cars as standard to become a leader of the car industry, but when they think about $$$$ Money yeah get options let people pay for it. I don't know some options most JAP cars give as standard!!! __________________

06-07-2012, 07:11 PM	#105
Mahzari Captain Drives: poorly Join Date: May 2010 Location: California Posts: 612 iTrader: (0)	This is amazing. The first I'm going to do when I get my F30 is get rid of auto start stop, the seatbelt warning, and the message on the iDrive. Thanks again __________________ 2012 328i Sport Line: H/K + SA Last edited by Mahzari; 06-08-2012 at 10:34 AM.

06-07-2012, 09:56 PM	#107
Raspartan Captain Drives: F30 335i Join Date: Oct 2011 Location: Toronto Posts: 679 iTrader: (0)	Didn't have much time after work today, but got a good start on the cable. Just need to solder the resistor and assemble the casing. I'll probably work on this on Saturday. Exciting! Last edited by Raspartan; 06-08-2012 at 08:01 AM.

06-07-2012, 05:58 PM	#102
Number ✚ Drives: ✚ Join Date: Feb 2012 Location: ✚ ✚ Posts: 989 iTrader: (1)	Svache! Congrats on the sticky and front page.

06-07-2012, 07:08 PM	#104
msellars Enlisted Member Drives: 550 Xi Join Date: Mar 2011 Location: Portland Posts: 30 iTrader: (0)	Is it possible to change the engine parameters ourselves? I have no clue how companies like Dinan change the ECU. Does anybody know how many parameters are changed and how they test it out?

06-07-2012, 09:16 PM	#106
KSF Veni, vidi, vici Drives: 335XI Join Date: Nov 2008 Location: New York City Posts: 1,584 iTrader: (4)	wait I'm kind of confused, will the diy cable work on previous models? such as e92?

06-07-2012, 10:14 PM	#108
d_dot 4 * General Drives: F12 M6,Audi R8 Lambo Gallardo Join Date: Dec 2007 Location: Tri-State Posts: 628 iTrader: (0)	is there anything like this for the new 535? __________________ Nissan GT-R (Sold) E92 M3 + 335 (sold) F10 535 (sold) When Driving Nice Whips It Helps To Have Nice Kix!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search