F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > Mechanical Maintenance and TSBs: Break-in / Oil & Fluids / Servicing / TSBs and Service Bulletin > Air Filter Replacement
GTB Performance
Post Reply
 
Thread Tools Search this Thread
      05-16-2012, 08:15 PM   #1
Rick4345
Lieutenant
 
Rick4345's Avatar
 
Drives: 2012 328i Mineral Gray
Join Date: Apr 2009
Location: Illinois

Posts: 424
iTrader: (6)

Air Filter Replacement

Has anyone been brave enough to figure out how to change the air filter? I just ordered a K&N filter for my car and was wondering how difficult it is. Thanks in advance!!
Rick4345 is offline   United_States
0
Reply With Quote
      05-26-2012, 09:16 AM   #2
Rick4345
Lieutenant
 
Rick4345's Avatar
 
Drives: 2012 328i Mineral Gray
Join Date: Apr 2009
Location: Illinois

Posts: 424
iTrader: (6)

Done

I found out how to do it. I gave a call to Robert at K&N. I sent him a picture of the engine bay. First, unsnap the four silver clips on the left. Then you have to loosen up the intake tube from the mass air flow sensor. Give a gentle tug on the rubber mounts and you're in business. The mounts are pliable enough you can pinch them together and make the process a little easier.
Rick4345 is offline   United_States
0
Reply With Quote
      05-26-2012, 04:50 PM   #3
Dabaitu
Colonel
 
Drives: anything given a chance
Join Date: Jul 2008
Location: .au

Posts: 2,848
iTrader: (0)

Garage List
A drop in filter should be easy to do, are you trying to explain removing the air-box and fitting a cone setup?
Dabaitu is offline   Australia
0
Reply With Quote
      05-26-2012, 05:30 PM   #4
Rick4345
Lieutenant
 
Rick4345's Avatar
 
Drives: 2012 328i Mineral Gray
Join Date: Apr 2009
Location: Illinois

Posts: 424
iTrader: (6)

drop in

No, Just the drop in filter. For some it's easy and obvious. For people like me, not so much.....
Rick4345 is offline   United_States
0
Reply With Quote
      06-01-2012, 12:52 PM   #5
jj970
Private First Class
 
Drives: Black F30 N20
Join Date: Nov 2009
Location: San Diego, Ca

Posts: 141
iTrader: (0)

Garage List
2007 335i Coupe  [0.00]
Quote:
Originally Posted by Rick4345 View Post
No, Just the drop in filter. For some it's easy and obvious. For people like me, not so much.....
Why did you change the filter already?
jj970 is offline  
0
Reply With Quote
      06-01-2012, 06:15 PM   #6
Rick4345
Lieutenant
 
Rick4345's Avatar
 
Drives: 2012 328i Mineral Gray
Join Date: Apr 2009
Location: Illinois

Posts: 424
iTrader: (6)

I replaced the filter for hopefully a little better performance and mileage. I have them in everything from my work car to my motorcycle. It may just be my imagination, but I have used them for about fifteen years easy. They have a million mile guarantee and can go about 50,000 miles without cleaning. Plus, under the Magnuson Moss Warranty Act, it won't screw up your warranty.
Rick4345 is offline   United_States
0
Reply With Quote
      06-21-2012, 06:20 AM   #7
Dabaitu
Colonel
 
Drives: anything given a chance
Join Date: Jul 2008
Location: .au

Posts: 2,848
iTrader: (0)

Garage List
I was doing some searching on this a few days ago, as I'd like to put a K&N or BMC filter in my car when it arrives.

I believe the flat-panel replacement for the E9x will fit in the F30.
Dabaitu is offline   Australia
0
Reply With Quote
      08-04-2012, 08:35 AM   #8
BRN55
Private First Class
 
Drives: 2013 335i M Sport
Join Date: Jul 2012
Location: BR

Posts: 133
iTrader: (0)

Wonder if BMC already makes one that fits the 328i / F30?
BRN55 is online now   Brazil
0
Reply With Quote
      08-28-2012, 12:37 AM   #9
steadymoddn504
Private
 
steadymoddn504's Avatar
 
Drives: F30 328i
Join Date: Aug 2012
Location: NorCal

Posts: 75
iTrader: (0)

Garage List
12 BMW 328i  [0.00]
afe makes replacement filters for the f30. there's the option of a wet and dry filter material.. haven't done this mod yet, but will soon. stock air filters always hinder a little performance (and overall sound imo)
__________________


the only thing in this world that gives orders is balls. You got that? Balls.
steadymoddn504 is offline   United_States
0
Reply With Quote
      09-18-2012, 02:32 PM   #10
Mrcarcrazy
Sarcasm free with all posts.
 
Drives: 05 Elise REV310
Join Date: Jul 2010
Location: Odessa, TX

Posts: 442
iTrader: (0)

Quote:
Originally Posted by steadymoddn504 View Post
afe makes replacement filters for the f30. there's the option of a wet and dry filter material.. haven't done this mod yet, but will soon. stock air filters always hinder a little performance (and overall sound imo)

Dyno proof?
Mrcarcrazy is offline  
0
Reply With Quote
      09-20-2012, 03:54 PM   #11
legaleye3000
First Lieutenant
 
Drives: 328i 2014
Join Date: Sep 2012
Location: South FL

Posts: 303
iTrader: (0)

So is it really worth it to put an aftermarket (K&N, etc.) air filter in? Thanks.
legaleye3000 is offline   United_States
0
Reply With Quote
      09-29-2012, 09:38 PM   #12
ocso1606
Lieutenant
 
ocso1606's Avatar
 
Drives: 2013 335i M
Join Date: Aug 2012
Location: Syracuse,NY

Posts: 531
iTrader: (0)

Garage List
2007 BMW 525xi  [0.00]
2010 Volvo  [0.00]
2013 BMW 335i M-Sport  [0.00]
There cant be much diff in performance with a drop in filter..can there?
__________________
2013 335i M-Sport, Alpine White, Red Coral Leather, 6SP M/T, 403m 19" wheels, M- Suspension, CWP, M-Performance Exhaust, M-Performance Power Pack!
ocso1606 is offline   United_States
0
Reply With Quote
      01-03-2013, 12:37 AM   #13
schnell13
Second Lieutenant
 
schnell13's Avatar
 
Drives: 2013 335i M Sport
Join Date: Jul 2012
Location: The Beach

Posts: 237
iTrader: (0)

Install Guide

Gentlemen and Ladies,

This guide is intended to help anyone install their new K&N, aFe, etc. replacement air filters. This is also intended for the 335 with a standard air box, or, NOT replaced with a CAI.

Reasons for getting a high-flow filter:
1. Our cars have a TURBO. This means that they'll run a bit hot over their NA cousins, along with needing more air for more proper combustion with the forced induction. I say let's give it to them!!
2. As others have said, it won't void your warranty, will give you (slightly) more hp, (slightly) better gas milege, and doesn't have to ever get replaced. So it pays for itself after 2-3 replacement filters. I've had a K&N in my Corvette, Mazda3, Altima SE-R and previous 328Ci, and have experienced noticeable gains in hp, torque, and fuel economy after their installation.
3. It's so easy (yes, if a caveman drove an F30, he could do it to!)

Steps:
1. Pop the hood
2. Locate the 4 silver tabs holding the top of the air cleaner box in place. If you are facing the vehicle looking into the engine bay, there will be two on the right side, one on the top left, and one on the left side.
3. Pry them loose using finger pressure. Be careful that they stay in place. I almost lost one into the depths of the engine bay!!
4. Gently lift up the top of the air cleaner box and remove the stock filter. I found that I had plenty of room to remove the old filter without disconnecting anything.
5. Place your replacement filter, drop the lid on top of it (it guides itself back into place with its tabs), lock it back in place with the tabs, and you're finished!
6. Place the accompanying sticker somewhere conspicuous on the car. You'll get 10 hp from that mod alone!!

Enjoy, and happy motoring!
__________________
Individual Order 2013 335i M-Sport through BMW Military Sales / Mineral Grey / Coral Red / 4MR / ZMM / ZPP / ZTP / ZDH / 2TB / 494 / 688 / ///M Performance / ///M5 Blue Brakes / K&N / aFe / H&R / Turner Motorsports / SportLine Wheels / Details, details, details...
schnell13 is offline   United_States
0
Reply With Quote
      01-03-2013, 12:41 AM   #14
schnell13
Second Lieutenant
 
schnell13's Avatar
 
Drives: 2013 335i M Sport
Join Date: Jul 2012
Location: The Beach

Posts: 237
iTrader: (0)

As an addendum to the previous install guide, here is the part number for the K&N filter: 33-2997. I used the configurator tool on K&N's website and had it shipped directly from them. The filter fit perfectly. Hope this helps!
__________________
Individual Order 2013 335i M-Sport through BMW Military Sales / Mineral Grey / Coral Red / 4MR / ZMM / ZPP / ZTP / ZDH / 2TB / 494 / 688 / ///M Performance / ///M5 Blue Brakes / K&N / aFe / H&R / Turner Motorsports / SportLine Wheels / Details, details, details...
schnell13 is offline   United_States
0
Reply With Quote
      01-21-2013, 06:24 PM   #15
dipak
Registered
 
Drives: 2013 F30 328Xi M Sport EBII
Join Date: Oct 2010
Location: US

Posts: 4
iTrader: (0)

I did a search on K&N website for my 328 and the number is K&N 33-2990
dipak is offline   United_States
0
Reply With Quote
      01-21-2013, 07:01 PM   #16
shivaswrath
Colonel
 
shivaswrath's Avatar
 
Drives: 2012 335i
Join Date: Apr 2008
Location: Lost in NJ

Posts: 2,809
iTrader: (3)

I'll do it after the 50k service is up...why pay to replace a filter they'll replace for free?
__________________
2012 335i Mineral Gray
M Performance Whore: PPK|Exhaust|Brakes|Performance Suspension Struts & Springs|Black Kidney Grilles|CF Spoiler and Mirror Caps|Bav Stage 1 upgrade |M Sport 400M|BMWF30.com
shivaswrath is offline   United_States
0
Reply With Quote
      02-19-2013, 12:15 AM   #17
Jeff_in_Oviedo
Delivered!
 
Jeff_in_Oviedo's Avatar
 
Drives: '13 F30 335 M Sport
Join Date: Feb 2013
Location: Oviedo, FL

Posts: 137
iTrader: (0)

Note, The K&N 33-2997 Filter is available on amazon for ~$37, versus the ~$55 on the K&N website.

Amazon link below, for those interested.
http://www.amazon.com/33-2997-Replac...=K%26N+33-2997
__________________
Delivered!: 2013 F30 335i M Sport, 8-speed Sport Trans, Estoril Blue/Coral Red, 403M, Premium Pkg, Dynamic Handling Pkg, Driver Assist Pkg, HK Sound, Enhanced BT & USB
Jeff_in_Oviedo is offline   United_States
0
Reply With Quote
      03-19-2013, 03:51 AM   #18
momo3605
Captain
 
Drives: 328i M Sport
Join Date: Aug 2012
Location: Norcal

Posts: 839
iTrader: (0)

I know horsepower isn't a reason to get the filter, but can anyone who's installed an aftermarket filter comment on sound or fuel economy?
momo3605 is offline  
0
Reply With Quote
      03-19-2013, 04:23 AM   #19
Thrillbilly
Rear Admiral
 
Thrillbilly's Avatar
 
Drives: Bavarian Milk Wagon
Join Date: Jun 2012
Location: Lago

Posts: 279
iTrader: (1)

Garage List
2013 335ix  [0.00]
I put the K&N filter in my 335 (Amazon $37) when I did my oil change. much higher quality over the stock Mahle paper filter. Very easy, straight forward remove and replace air filter.
Thrillbilly is offline   Belgium
0
Reply With Quote
      05-27-2013, 03:50 AM   #20
SteveChester
Steve Roberts
 
Drives: F30 330d M Sport
Join Date: Oct 2009
Location: Chester

Posts: 369
iTrader: (0)

Garage List
Quote:
Originally Posted by schnell13
Gentlemen and Ladies,

This guide is intended to help anyone install their new K&N, aFe, etc. replacement air filters. This is also intended for the 335 with a standard air box, or, NOT replaced with a CAI.

Reasons for getting a high-flow filter:
1. Our cars have a TURBO. This means that they'll run a bit hot over their NA cousins, along with needing more air for more proper combustion with the forced induction. I say let's give it to them!!
2. As others have said, it won't void your warranty, will give you (slightly) more hp, (slightly) better gas milege, and doesn't have to ever get replaced. So it pays for itself after 2-3 replacement filters. I've had a K&N in my Corvette, Mazda3, Altima SE-R and previous 328Ci, and have experienced noticeable gains in hp, torque, and fuel economy after their installation.
3. It's so easy (yes, if a caveman drove an F30, he could do it to!)

Steps:
1. Pop the hood
2. Locate the 4 silver tabs holding the top of the air cleaner box in place. If you are facing the vehicle looking into the engine bay, there will be two on the right side, one on the top left, and one on the left side.
3. Pry them loose using finger pressure. Be careful that they stay in place. I almost lost one into the depths of the engine bay!!
4. Gently lift up the top of the air cleaner box and remove the stock filter. I found that I had plenty of room to remove the old filter without disconnecting anything.
5. Place your replacement filter, drop the lid on top of it (it guides itself back into place with its tabs), lock it back in place with the tabs, and you're finished!
6. Place the accompanying sticker somewhere conspicuous on the car. You'll get 10 hp from that mod alone!!

Enjoy, and happy motoring!
Is this the same for the 330d motor? Are there any guides or pictures explaining it? Thanks Steve.
__________________
Steve Roberts
F30 330D.
SteveChester is offline   United Kingdom
0
Reply With Quote
      06-13-2013, 09:57 AM   #21
rustyminded
Lieutenant
 
Drives: bmw 328i
Join Date: Nov 2012
Location: C

Posts: 462
iTrader: (0)

I have the afe dry filter, it's very good in my sandy weather and you have to put in consideration K&N is oiled so most oil is sucked up on your MAF and it will be clogged sooner that's for any oiled filter
rustyminded is offline  
0
Reply With Quote
      06-29-2013, 02:56 PM   #22
SmokeShank
New Member
 
Drives: 328xi M-Sport
Join Date: Jun 2013
Location: Columbus, OH

Posts: 24
iTrader: (0)

Aftermarket filter on the N20/26 IMO is a waste of money.

BMS found no power gains over the stock air box setup. Maybe if sound is changed then sure... but I'm not spending money on something that has minimal gains and is covered under factory maintenance.
SmokeShank is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:53 AM.




f30post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST