[kon]

Originally Posted by john08135i

i did and i drove across time zone few times with no change..

I might sounded silly but do you have nav/gps?

have coded mine a few months now, it still somehow sync with my iphone time exact down to the second (the minute tick together)

[john08135i]

Yes of course. I set it and drove across few time zones no change at all.

[lokito]

Originally Posted by Frogman

For the mirror folding and windows up/down via the fob, you also have to code FEM_BODY / 3053 PwMaster / KOMFORTSCHLISSUNG_FB to aktiv (Werte=00).

Note that Werte=00 is not a typo, it's a strange one in that usually aktiv has a Werte=01 and nicht_aktiv has a werte of 00). This one does not!

Just code the function value to aktiv and leave the Werte alone and you will be fine.


I can't help you on the FEM_BODY / 3050 / FH_TUERAUF_STOP_MAUT, that only needs that one value to be changed. Note that you need to set it to nicht_aktiv (default is aktiv). You should double check that it's actually coded to nicht_aktiv by re-reading the coding data from the car.

Awesome, thanks! That fixed the problem with the mirrors. About the windows roll up, the value is set to nicht_aktiv. Not sure why is not working, I might change it back to default and try again.

[raj10800]

Originally Posted by shawnsheridan

A2DP requires 6NK or 6NL. If you have only 6NH, I do not think you can code it.

BMW Apps will require you to purchase a 6NR FSC Code and Import and Activate it, and if you want the Video / PlugIn functionality too, you have to retrofit 6NF Ejector Box (Base Plate), or replace the 6FL USB/Aux-In port with the Mini USB/AV-In port and run FBAS video line from new connector to the CIC.

Shawn,

As mentiuoned earlier I have 6NH and Prof Navigation. Will I be able to code 6NH to 6NK (as sent tome by you earlier) or is it not possible as per your this quote.

Regards,
Rajesh

[ykau]

that is strange. I have my Ilevel upgraded to 505 today and all settings are reverted back. the strange thing was I as usual set the INHK -> memory_off -> the air con setting and suddenly the air con heater button went blinking. Try to set it back but the INHK-CAFD-SVT are gone or rather its no longer green anymore.
what worst is blowing warm air instead of air con. What happened to it guys. I'm using 3.18 and 48.1. thanks

[shawnsheridan]

Originally Posted by ykau

that is strange. I have my Ilevel upgraded to 505 today and all settings are reverted back. the strange thing was I as usual set the INHK -> memory_off -> the air con setting and suddenly the air con heater button went blinking. Try to set it back but the INHK-CAFD-SVT are gone or rather its no longer green anymore.
what worst is blowing warm air instead of air con. What happened to it guys. I'm using 3.18 and 48.1. thanks

Not sure, but you need to add CAFD back.

Connect => Read FA => Activate FA => Read VCM => Left-Click on INHK => Click on "Detect CAF for SWE" => Select the CAFD matching your I-Level => Select OK => Right-Click on INHK (the ECU itself not the underlying CAFD) => Select CODE.

[ykau]

Originally Posted by shawnsheridan

Not sure, but you need to add CAFD back.

Connect => Read FA => Activate FA => Read VCM => Left-Click on INHK => Click on "Detect CAF for SWE" => Select the CAFD matching your I-Level => Select OK => Right-Click on INHK (the ECU itself not the underlying CAFD) => Select CODE.

thanks bro. it works!! You have saved me once again!!

[ykau]

Hi shawn, I wondered if i'm being paranoid, the car engine sounded more noisy than before after the ilevel upgrading. It sounded more like a truck now. Anything to do with INHK? thanks

[shawnsheridan]

Originally Posted by raj10800

Shawn,

As mentiuoned earlier I have 6NH and Prof Navigation. Will I be able to code 6NH to 6NK (as sent tome by you earlier) or is it not possible as per your this quote.

Regards,
Rajesh

With Nav Pro, you should have a Combox, so you should be able to go from 6NH to 6NK.

[shawnsheridan]

Originally Posted by ykau

Hi shawn, I wondered if i'm being paranoid, the car engine sounded more noisy than before after the ilevel upgrading. It sounded more like a truck now. Anything to do with INHK? thanks

I don't see how. This ECU is for the Integrated automatic heating/air conditioning system.

[ykau]

Originally Posted by shawnsheridan

I don't see how. This ECU is for the Integrated automatic heating/air conditioning system.

thanks bro. I think could be the normal characteristic of the car .

[kon]

Originally Posted by ykau

that is strange. I have my Ilevel upgraded to 505 today and all settings are reverted back. the strange thing was I as usual set the INHK -> memory_off -> the air con setting and suddenly the air con heater button went blinking. Try to set it back but the INHK-CAFD-SVT are gone or rather its no longer green anymore.
what worst is blowing warm air instead of air con. What happened to it guys. I'm using 3.18 and 48.1. thanks

The dreaded 505. You should be using esys3.22 and 48.3 already. But it's interesting that you could still code, all we get was error when trying to code. And since you've moved up to 505, safe to assume dealer upgraded your car I-level successfully then.

[ykau]

Originally Posted by kon

The dreaded 505. You should be using esys3.22 and 48.3 already. Button it's interesting you could still code, all we for was error. And since you've moved up to 505, safe to assume dealer upgraded your car I-level successfully then.

hi kon, yes. I can still code INHK, FEM_BODY and KOMBI but except for HU_CIC. Upgrading was first failed until I have reverted back the VO settings including the office or the bmw apps.

Now the problem is it seem the engine is louder than before. sigh... can i pay you a visit?


You guys may want to take note before the upgrading process. thanks.

[kon]

Originally Posted by ykau

Now the problem is it seem the engine is louder than before. sigh... can i pay you a visit?

For? I can't fix loud engine noise

[raj10800]

Originally Posted by Aritaurus

I was actually on 6NH and changed it to 6NK. I just FDL coded a few things on HU_CIC and got connected drive to come up.

I think this is the part where I need to use a ghost vin like you said earlier. For me, I have nothing to lose since I don't have BMW assist. It just shows up on my menu with some phone numbers to call for service.

Hi Aritaurus - what do I need to code to get Connected drive enabled. I have a F30 with 6NH and Prof Nav.

[shawnsheridan]

Originally Posted by kon

For? I can't fix loud engine noise

Some people will want to know what was done to enable "truck engine" option...so they can do it too.

[dcg71]

DIES_IST_TRUCK -> activ

[eclipsisNA]

Can anyone confirm that a USB OBD2 cable would work instead of an ENET? I was looking at this:

http://www.ebay.com/itm/DIAGNOSTIC-C...item43b194141a

[shawnsheridan]

Originally Posted by eclipsisNA

Can anyone confirm that a USB OBD2 cable would work instead of an ENET? I was looking at this:

http://www.ebay.com/itm/DIAGNOSTIC-C...item43b194141a

Work for what? E-Sys? No. It must be an ENET Cable. That cable is a VAG-COM Cable for VW & Audi.

[martinf79]

Originally Posted by shawnsheridan

Some people will want to know what was done to enable "truck engine" option...so they can do it too.

I'd like to know what option this is....

[martianpc]

These torrents are really looking good. Any idea how many seeders we have? I may have to back off, my network has been giving me trouble. I have uploaded 244GB so far over the 4 files since started seeding though! I think we have a lot of people who want to code.

[shawnsheridan]

Originally Posted by martianpc

These torrents are really looking good. Any idea how many seeders we have? I may have to back off, my network has been giving me trouble. I have uploaded 244GB so far over the 4 files since started seeding though! I think we have a lot of people who want to code.

My server is still serving up around 500 Gb per day.