[shawnsheridan]

Originally Posted by Frogman

If there was a risk free way to experiment with coding these parameters, I'd be glad to tweak settings endlessly trying to get something to work.

The thought of bricking my expensive and primary means of transportation doesn't really motivate me to experiment all that much.

Sorry, but no. It's all trial and error, and you can easily reset an ECU. I have never heard of anyone bricking an ECU coding it though. That usually only happens during a bad firmware flash, or screwing with FSC Codes in CIC.

[Frogman]

Originally Posted by martinf79

Don't seem to have that button. Don't have PDC.

Tried to program one of the memory buttons... doesn't seem to be programable either. Sucks. Guess I can't enable the camera while driving if I can't access the option.

In the US, you can't order an F30 with the rear view camera without also getting PDC. If you don't have a button, they I guess you are SOL. Sorry!

[shutterlife]

Hi Shaun

Can you send me the files to do this myself.

Shuttetlife@yahoo.com

Thanks

[shawnsheridan]

Originally Posted by shutterlife

Hi Shaun

Can you send me the files to do this myself.

Shuttetlife@yahoo.com

Thanks

PM Sent.

[JMAX]

For the life of me, I can't find anywhere on this thread where to download the files needed for coding.

Can someone help me out? Thanks!

[avgor123]

Hi Shaun!

After software upgrade of my car, ESYS doesn't find CAFD files. I have psdzdata 2.46.7.

Can you send me the new files if that is enough for coding?

• CAFD_00000911_003_000_002
• CAFD_00000912_003_005_012
• CAFD_00000913_003_003_005
• CAFD_000001A7_000_011_017
• CAFD_000009EF_000_018_003
• CAFD_0000023F_016_016_018
• CAFD_00000098_000_008_080
• CAFD_00000C77_000_002_000
• CAFD_00000794_004_122_083
• CAFD_00000A07_002_010_002
• CAFD_00000A08_003_009_001
• CAFD_000000F9_007_003_005
• CAFD_0000067B_002_003_131
• CAFD_00000A3F_005_001_011
• CAFD_000009C8_005_000_030
• CAFD_000007A1_005_022_028
• CAFD_00000D37_001_000_000

Or send me a link to download a new psdzdata set.

avgor@nwgsm.ru



Thanks

[MrTowers]

Hello, could I also get a copy of the link to download the data files?
Thanks

Hector@torresfam.com

[shawnsheridan]

Originally Posted by JMAX

For the life of me, I can't find anywhere on this thread where to download the files needed for coding.

Can someone help me out? Thanks!

PM Sent.

[shawnsheridan]

Originally Posted by avgor123

Hi Shaun!

After software upgrade of my car, ESYS doesn't find CAFD files. I have psdzdata 2.46.7.

Can you send me the new files if that is enough for coding?

• CAFD_00000911_003_000_002
• CAFD_00000912_003_005_012
• CAFD_00000913_003_003_005
• CAFD_000001A7_000_011_017
• CAFD_000009EF_000_018_003
• CAFD_0000023F_016_016_018
• CAFD_00000098_000_008_080
• CAFD_00000C77_000_002_000
• CAFD_00000794_004_122_083
• CAFD_00000A07_002_010_002
• CAFD_00000A08_003_009_001
• CAFD_000000F9_007_003_005
• CAFD_0000067B_002_003_131
• CAFD_00000A3F_005_001_011
• CAFD_000009C8_005_000_030
• CAFD_000007A1_005_022_028
• CAFD_00000D37_001_000_000

Or send me a link to download a new psdzdata set.

avgor@nwgsm.ru



Thanks

You need the whole updated PSdZData.

Email sent.

[pacecapt]

Svache, I have been following you F30 Coding postings and used some of your and others finding to code out the aftermarket LED Bulb errors for my 2013 X3 (F25). Since the F30 and F25 use the same E-Sys software, I thought I would share my discoveries and fixes for LED Bulb errors. The attached PDF shows the coding I have done in regard to this issue, it maybe of help in coding F30's.

[Sephanite]

i am looking for a digital rev bar on the HUD? not sure if anyone has come across something that looks like it

[andri]

Originally Posted by shawnsheridan

PM Sent.

Could you PM to me all required coding software for Mac? Thanks in advance.

[avgor123]

Originally Posted by shawnsheridan

You need the whole updated PSdZData.

Email sent.

Thank you, Shawn.
It's working now.

[andri]

Originally Posted by sudyawi

Greetings from Indonesia!!
I was wondering if anyone would be kind enough to share the download links to e-sys software and data files? Since i am nubie with zero post, had to trouble u by sending them to my email address, sudyawi@gmail.com

Many thanks and hope i can contribute more in the future.

Awi

Hi Sudyawi, that makes two of us from Indonesia. Gw dari Bandung

Is there any required coding software for Mac? If not, for Windows is OK. Please somebody PM to me, or email the URLs to: an.dri at me dot com

Thanks in advance.

[shoptb]

Has anyone figured out how to set the default driving mode to something other than Comfort?

[shawnsheridan]

Originally Posted by andri

Hi Sudyawi, that makes two of us from Indonesia. Gw dari Bandung

Is there any required coding software for Mac? If not, for Windows is OK. Please somebody PM to me, or email the URLs to: an.dri at me dot com

Thanks in advance.

PM Sent.

Read this for MAC Setup:

https://www.rapidshare.com/files/264...figuration.pdf

[demge01]

Originally Posted by shoptb

Has anyone figured out how to set the default driving mode to something other than Comfort?

Nope. Mine defaults to Eco Pro.

[dc_bmw]

Originally Posted by demge01

Nope. Mine defaults to Eco Pro.

Then it is possible somehow

[demge01]

Originally Posted by dc_bmw

Then it is possible somehow

Indeed!

[andri]

Originally Posted by shawnsheridan

PM Sent.

Read this for MAC Setup:

https://www.rapidshare.com/files/264...figuration.pdf

Got it! Super thank Shawn, you da man!

[shoptb]

Originally Posted by demge01

Nope. Mine defaults to Eco Pro.

Did your car come from the factory like this?

[john08135i]

They always DEFAULT to comfort mode..