View Single Post
      11-29-2012, 05:36 PM   #14
SlowSaloonM3
Major General
 
SlowSaloonM3's Avatar
 
Drives: m3 saloon in granny mode.
Join Date: Dec 2009
Location: lost angeles

Posts: 5,943
iTrader: (0)

Quote:
Originally Posted by juddholland View Post
DSC remains on when DTC is activated either by enabling SPORT+ or by pressing the DSC button once. SPORT+ automatically enables DTC so you can get tail happy, but DTC's other function is to provide a greater slip threshold on looser surfaces where momentum is key. If DSC remained on in full force, the car would instinctively cut power and apply the brakes when slippage is needed. This loose threshold, combined with default COMFORT mode (the car calls this TRACTION mode), provides for more dramatic weight transfer/squat (think: putting sandbags over the powered axles) and allows you to make more deliberate throttle inputs to get yourself out of a ditch, snow bank, or up wet/slippery inclines. (Note: if you do not have the adaptive suspension, COMFORT only applies to throttle response). DSC OFF, which requires that you hold the DSC button for a number of seconds, puts everything in SPORT and leaves managing the car's dynamics up to you.

This is why SPORT+ is simply SPORT with DTC enabled. If you press the button for DTC in SPORT or COMFORT, the car will go into TRACTION mode. But SPORT+ is the only way to turn DTC on without enabling TRACTION mode. So you can think of SPORT+ as power slide mode.
Holding down traction control button for a few seconds - that equals TRUE power slide mode.
Sport+ just turns dynamic traction on - a little more slip but you're not gonna be sliding all over the place.

As far as feeling like its back in comfort mode when turning traction off completely, its just the throttle. And when you are sliding like that, you want to be able to feather the gas a lot more than basically having an on/off switch of a gas pedal. Maybe its just safety.
__________________

Monkey see monkey do...I drive a poseur modified sedan.
SlowSaloonM3 is offline  
0
Reply With Quote